Disc Sanding Tips

Always use the Sander on the downward rotating half of the Sanding Disc.

Use the Sanding Disc for sanding the ends of small and narrow workpieces and outside curved edges.

Contact the sanding surface with light pressure, keeping aware of what part of the disc you are contacting. The outer edge of the disc moves faster and removes more material than the area of the Sanding Disc closer to the center of the Disc.

Belt Sanding Tips

Use the Belt Sanding surface to sand wood, deburr metal, or polish plastic.

Adjust the Belt Table and miter gauge to the desired angle of the Tool.

Hold the tool firmly on the Belt Table top and slide the tool toward the sanding surface making light contact until the bevel is sharpened.

Please send message to us from the page of “contact us” or bottom of product page if you are interested in Allwin belt disc sanders.